Technical data

TM 9-1005-319-23&P 0037
0037-7/8 blank
c. If 300 meter mark is not aligned with mark on carrying handle assembly, slip range scale in the
following manner:
(1) Position 300 meter mark with mark on carrying handle assembly.
(2) Insert a 1/16 in. key wrench through access hole of rear sight assembly and into index screw.
(3) Loosen index screw three turns and leave wrench in place.
(4) Rotate lower portion of knob counterclockwise until it stops (range scale should not have
moved). Knob should be positioned on its last whole click.
(5) Tighten index screw and remove wrench.
(6) Check for proper setting.
END OF TASK
END OF WORK PACKAGE