Technical data

TM 9-1005-319-23&P 0035
0035-3
3. Repaint blank firing attachment using enamel paint. Use red (WP 0045, item 24) for M16A2, M16A3,
and M16A4 rifles or yellow (WP 0045, item 25) for M4 and M4A1 carbines. Painting is the only repair
authorized.
4. Replace blank firing attachment if unserviceable.
END OF TASK
REMOVAL
CAUTION
Do not use tools to tighten the blank firing attachment. Use hands only.
1
3
1 v s 3 2 6
Figure 4. Unscrewing Slide from Compensator.
1. Unscrew slide (1) to remove from compensator (3).
1 v s 3 2 7
2
3
Figure 5. Removing Blank Firing Attachment.
2. Unhook blank firing attachment (2) from behind the first groove of the compensator (3).