Technical data

TM 9-1005-319-23&P 0035
0035-2
INSTALLATION - Continued
1 v s 3 2 4
2
3
Figure 2. Placing Blank Firing Attachment.
2. Hook blank firing attachment (2) behind the first groove of the compensator (3).
1 v s 3 2 5
1
3
Figure 3. Securing Blank Firing Attachment.
CAUTION
Do not use tools to tighten the blank firing attachment. Use hands only.
3. Push slide (1) into compensator (3) and hand tighten.
NOTE
Check for tightness after firing approximately 50 blank rounds.
END OF TASK
REPAIR OR REPLACEMENT
1. Clean blank firing attachment with CLP (WP 0045, item 9), wipe dry, and coat with CLP.
2. Inspect blank firing attachment for cracks or distortion. Be sure the parts in the slide are clear and
clean. If blank firing attachment is cracked or distorted, it is unserviceable.