Technical data

TM 9-1005-319-23&P 0034
0034-5/6 blank
1 v s 3 2 0
1 0
9
Figure 9. Attaching Sling to Quick Release Swivel.
10. Attach end of standard sling (9) to quick release swivel (10) as shown in Figure 9.
1 0
1 0
1 v s 3 2 1
Figure 10. Attaching Swivel to Lanyard.
11. Attach swivel (10) to lanyard assembly. Unscrew nut counterclockwise while pulling outward, stopping
when resistance is felt. Push inward on plastic nut and rotate plate a quarter turn.
1 0
9
1 v s 3 2 2
Figure 11. Securing Swivel and Lanyard.
12. The swivel (10) can be attached to the lanyard in one of two ways; it can be attached either to the lug
on the end of the lanyard or to the lug attached to the barrel band. When the lanyard is attached to the
barrel lug, note that the lanyard is dressed around the sling (9) and inserted between the layers of the
sling.
END OF TASK
REPAIR OR REPLACEMENT
Visually inspect close quarters battle sling and replace if it is badly worn or damaged.
END OF TASK
END OF WORK PACKAGE