Technical data

TM 9-1005-319-23&P 0026
0026-1
FIELD MAINTENANCE
ADAPTER RAIL COVER ASSEMBLIES MAINTENANCE
REMOVAL, REPAIR OR REPLACEMENT, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Small Arms Tool Kit, SC 5180-95-B71
References
WP 0039
REMOVAL
1 v s 2 1 7
21
Figure 1. Removal/Installation of Rail Cover.
NOTE
Rail covers are quickly detached from the adapter rail. A spring tension clip at one
end of each rail cover automatically engages cutouts positioned at either end of the
four rail sections.
To slide rail cover beyond a cutout, or to remove it, slide rail cover (1) in desired direction while applying
thumb pressure to spring tension clip (2).
END OF TASK
REPAIR OR REPLACEMENT
1. Use the general purpose brush (M16 rifle double-ended toothbrush) from the standard rifle/carbine
cleaning kit to clean rail covers.
2. If rail covers are exposed to salt water or corrosive chemicals, thoroughly rinse in fresh water as soon
as the tactical situation allows. Thoroughly clean, inspect, and lubricate spring retaining clips.
3. Clean and inspect the rail covers and the rail grabbers of accessories to be mounted prior to embarking
on tactical operations or training events.