Technical data

TM 9-1005-319-23&P 0025
0025-2
DISASSEMBLY - Continued
RIFLE ONLY
NOTE
Use padding between lower receiver and brass vise jaws. Grip the solid portion of the
lower receiver with brass vise jaws which conform to the shape of the lower receiver
in this area.
1 v s 2 0 8
6
5
4
2
7
Figure 2. Removal of Lower Receiver Extension (Rifle).
3. Clamp lower receiver (2) in a machinist's vise using vise jaw caps and tighten on solid portion just tight
enough to hold.
WARNING
To avoid injury to your eyes, use care when removing spring-loaded parts.
NOTE
As lower receiver extension is removed, catch buffer retainer and helical spring.
Lower receiver is a serial number controlled item.
4. Remove lower receiver extension (4) from lower receiver (2) using combination wrench (7) (WP 0039,
Figure 23, item 10). Catch buffer retainer (5) and helical spring (6).