Technical data

TM 9-1005-319-23&P 0021

0021-20

ASSEMBLY - Continued

ALL WEAPONS

1 v s 1 9 6

3 2

Figure 28. Installation of Pistol Grip.

WARNING

Any screw longer than 1 1/8 inch used with enhanced rifle grip part number 9349127

could cause a hazardous situation.

CAUTION

Do not kink helical spring during assembly.

21. Install safety detent (4), pointed end first, and helical spring (5) into bottom of lower receiver and

receiver extension assembly (32).

NOTE

A portion of the helical spring will fit in a hole in the pistol grip.

When utilizing the enhanced rifle grip (it has a bump between the second and third

finger for a better grip) PN 9349127, rifle grip screw, PN AN501D416-18 (1 1/8 in.) or

AN501D416-16 (1 in.), is authorized to be used with the enhanced grip.

Ensure the washer is in place.

22. Carefully install pistol grip (1) to compress helical spring (5). Secure pistol grip in place with new

lockwasher (3) and machine screw (2).