Technical data

TM 9-1005-319-23&P 0021
0021-16
ASSEMBLY - Continued
WARNING
To avoid injury to eyes, use care when installing spring-loaded parts.
NOTE
Make sure hammer is cocked and selector lever is not set on BURST before installing
buffer assembly.
1 v s 1 9 1
1 9
2 0
2 1
Figure 23. Installation of Action Spring and Buffer Assembly.
14. Press action spring (19) and buffer assembly (20) until buffer retainer (21) snaps up and holds them in
place.
1 v s 1 9 2
1 8
1 7
4 3
Figure 24. Installation of Pivot Pin Detent.