Technical data

TM 9-1005-319-23&P 0015
0015-11
WARNING
DICHLOROMETHANE
b. Wash area with technical dichloromethane (methylene chloride) (WP 0045, item 14) to remove all
dirt, grease, and foreign material.
c. Apply sealing compound (WP 0045, item 32), mixed in accordance with manufacturer's directions,
to areas to be filled.
d. Spread sealing compound as smoothly as possible into defective area using a putty knife or similar
tool.
NOTE
Do not feather edges.
e. Place a sheet of polyethylene (WP 0045, item 28), cut to size, over filled area. Rub by hand to
smooth.
2. After curing, remove polyethylene sheet in accordance with instructions from manufacturer.
3. Wash area with technical dichloromethane (methylene chloride) (WP 0045, item 14) to remove all dirt,
grease, and foreign material.
4. Roughen area to be refinished with abrasive cloth (WP 0045, item 13) and clean surface again. Do not
touch the area with fingers.