Technical data

TM 9-1005-319-23&P 0015
0015-5
1 3
1 4
1 5
1 6
1 7
1 v s 1 0 7
Figure 7. Removal of Compensator.
8. Position upper receiver and barrel assembly (14) in barrel removal fixture (13) and secure both in
machinist's vise (17).
9. Using combination wrench (15), remove compensator (16).
1 4
1 8
1 v s 1 0 8
Figure 8. Removal of Recessed Washer.
10. Remove recessed washer (18) and discard.
11. Remove upper receiver and barrel assembly (14) from barrel removal fixture and machinist's vise.