Technical data

TM 9-1005-319-23&P 0014
0014-2
CLEANING
Clean all items; refer to TM 9-1005-319-10. Remove carbon deposits.
END OF TASK
REPAIR OR REPLACEMENT
Inspect all items for breaks, cracks, or damage. Replace all unserviceable items as authorized by WP 0039.
END OF TASK
ASSEMBLY
1. Lightly lubricate all items; refer to TM 9-1005-319-10.
WARNING
To avoid injury to eyes, use care when installing spring-loaded parts.
1 v s 1 0 0
4
3
1
2
Figure 2. Assembly of Charging Handle Assembly.
2. Position helical spring (3) and charging handle latch (4) in charging handle (2). Align holes and hold in
position.
3. Install spring pin (1) using hammer. Make sure spring pin is flush.
END OF TASK
END OF WORK PACKAGE