Technical data

TM 9-1005-319-23&P 0013
0013-3/4 blank
1 v s 0 9 7
1
Figure 4. Staking Carrier Key Screws.
S U R F A C E A
0 . 0 2 5 M A X
4 P L A C E S
1 v s 0 9 8
Figure 5. Staking Carrier Key Screws in the Field.
NOTE
Field staking method will be used by field units.
4. Use solid center punch and hand hammer to stake the two carrier key screws (1) in three places.
5. Reassemble weapon; refer to TM 9-1005-319-10.
NOTE
If blanks are used, blank firing attachment (BFA) must be attached.
6. If the bolt carrier key is replaced, three to eight rounds of blank or ball ammunition must be fired to
ensure a seal is created. Manual operation of the weapon may be required. Refer to TM 9-1005-319-10
for firing.
END OF TASK
END OF WORK PACKAGE