Manualshelf

Technical data

ManualsBrandsCarbine ManualsRemote Starter6850
131132133134135136137138139140
TM 9-1005-319-23&P 0011
0011-8
ASSEMBLY - Continued
1. Lubricate parts; refer to TM 9-1005-319-10.
NOTE
Before installing bolt assembly, check to see that the bolt ring gaps are staggered to
prevent loss of gas pressure.
2. Install bolt assembly (4) into key and bolt carrier assembly (5).
3. Install bolt cam pin (3) and rotate one turn to secure bolt assembly (4).
4. Hold key and bolt carrier assembly (5) with bolt assembly (4) down and drop in firing pin (1).
5. Install firing pin retaining pin (2) from left side only to ensure proper installation. Check installation
by attempting to shake out firing pin (1).
END OF TASK
END OF WORK PACKAGE