Data Sheet

5/3/2018 Shapeoko XXL T-Track installation - Carbide 3D
http://docs.carbide3d.com/assembly/t-tracks/xxl/ 2/5
Item Description  Qty 
Middle
Filler
10 × 39″, MDF - 3 
#8 × 1/2″
Screw
(to secure T-
Tracks)
- 50 
#8 × 1-
1/4″
Screw
(to secure
filler strips)
- 30 
#2
Phillips
Driver
(magnetic,
1/4″ hex)
- 1 
5/64″
Drill Bit
(to pre-drill
screw holes)
- 1 
Layout
Beginning on the left side of the machine, place one Side Filler strip flush the edge and flush
with the front of the table. It is helpful to clamp this piece in place once you have it aligned.