Assembly Instructions

16/01/2019 Shapeoko Assembly Guide - Carbide 3D
https://docs.carbide3d.com/assembly/shapeoko/s3/ 8/35
them secure and reduce the chance of vibration
causing the screws to become loose.
Z-Carriage
Flip the Z Carriage and orient the Z Carriage so it is as
shown in the image below.
NOTE: The bearings and belt will now be on the
underside.
Align the Z-carriage with the bottom of the X-carriage,
making sure the eccentrics on the Z-carriage are
positioned on the left side, as shown in the image
below.
When aligning the carriages, make sure the groove in
the V-wheel is aligned with V-rail on the X-carriage. The
wheels will slide up the V, seating evenly and securely
on both sides.