Manualshelf

Assembly Instructions

ManualsBrandsCarbide 3D ManualsTabletop Milling MachinesCarbide3D Shapeoko 3 Standard Robust CNC Router Kit
26272829303132333435
16/01/2019 Shapeoko Assembly Guide - Carbide 3D
https://docs.carbide3d.com/assembly/shapeoko/s3/ 32/35
If you are installing homing switches at this time, route
those through the port opening and to their
connection points. Notice the orientation of the cables
and the order (X/Y/Z from right to left).
Attach the X and Z axis stepper motors to their
respective ports (labeled on the silkscreen as well).
Then, connect the Y1 and Y2 stepper motors to their
ports. NOTE: these wires do not cross each other. If
you install them in the wrong port, your machine will
run in the opposite direction for the Y axis.