Assembly Instructions

16/01/2019 Shapeoko Assembly Guide - Carbide 3D
https://docs.carbide3d.com/assembly/shapeoko/s3/ 23/35
screw can catch a thread into the belt clip nut (as
shown).
Once the screw is engaged with the nut, tighten the
clip with a 4mm allen key.
Routing the X Axis Belt
Lay the belt across the entire extrusion, threading
it below the idlers with the teeth facing down.
Using the 1.5mm hex key as a lever, push the
timing belt between the idlers.