Manualshelf

Assembly Instructions

ManualsBrandsCarbide 3D ManualsTabletop Milling MachinesCarbide3D Shapeoko 3 Standard Robust CNC Router Kit
12345678910
16/01/2019 Shapeoko Assembly Guide - Carbide 3D
https://docs.carbide3d.com/assembly/shapeoko/s3/ 10/35
The Idler can move up and down in its groove. You
may have to loosen the nut to move the Idler.
Carefully wrap the upper portion of the belt around
the top pulley as shown.
NOTE: If you had to loosen the Idler nut to move it,
move the Idler down to provide some tension on
the belt and nger-tighten again so the belt does
not come o the Idler.