Owner Manual
STAINLESS STEEL
Stainless Steel does not stain, corrode or rust as easily as ordinary steel however, it is not actually stain or rust proof. In
extreme coastal locations or if the Steel is regularly subjected to water or high humidity, brown discoloration (tea staining)
can appear on the surface of products. Tea staining can normally be removed with mild abrasive cleaner and warm
soapy water.
NICKEL, BRASS, COPPER, PEWTER AND SILVER
Keep metal dry to prevent tarnishing which can dull or destroy the surface. Avoid using abrasive cleaners that can scratch
and dull metal surfaces. Rub the metal with straight back-and-forth motions, rather than in circles, to help maintain a
uniform appearance. Apply metal cleaner with a clean, soft, lint-free cloth and prevent undiluted liquid dish-washing
detergents from coming into direct contact with metal as it can damage the nish.
IRON AND BRONZE
Iron and Bronze pieces just need an occasional wax. However, in high trafc areas or areas that are exposed to abnormal
interior humidity, Iron may require more frequent maintenance.
STONE
Marble, Travertine, Granite, Limestone, and Cement Stone are very delicate and must be cleaned with neutral, gentle
cleaners. Acids, even the mild acid in vinegar, will dissolve the nish and permanently etch the surface. Some stones are
very porous and therefore, may absorb liquid spills. If liquid spills do occur, wipe it dry as soon as possible by blotting dry with
a clean cloth. The best method for cleaning Stone is to wet a clean cloth with lukewarm water to wipe the surface, and
to remove any marks. You can use a very mild detergent to remove any tricky stains, but try and limit to once every few
months. Do not place glasses directly on Stone, and always use a dry cloth to dry and shine the Stone to prevent liquids
from getting into the Stone core.
SHELL AND PIECED AGATE
Shell is a natural product. It is essential to keep away from direct sunlight, strong sources of heat or very dry atmospheres.
Avoid using strong abrasives or alcohol to polish the Shell, as this will destroy its natural color. To clean your Shell surface,
simply wipe down occasionally with a clean, slightly damp cloth, and then blot dry.
GLASS/MIRRORED GLASS
Glass and/or Mirrored surfaces require low maintenance. A weekly wipe with a slightly damp cloth is sufcient. Objects
placed on Glass or Mirrored Glass should always have a felt protector applied to the underside of the item so as not to
scratch the surface. Further, items placed on the Glass should be the correct weight for the Glass thickness and distance
spanned.
RESIN AND ACRYLIC
Resin and Acrylic are both synthetic materials that can easily scratch and mark. Avoid placing sharp objects on their
surfaces. Certain solvents can damage Resin and Acrylic, so it is best to keep your furniture away from harsh chemicals.
To clean your furniture, use a mild detergent in lukewarm water with a clean soft cloth to wipe the surface down. Always
rinse the detergent off the surface with a new clean cloth. Once the surface has been appropriately cleaned, dry the
surface by blotting with a clean soft cloth. For Acrylic, use a soft cloth and non-abrasivve cleaner formulated specically
for Acrylic surfaces.
SILVER LEAF
Silver Leang is a multi-step, hand applied process. The Silver Leaf sheets are tissue paper thin foil squares made of a
variety of metals, mostly copper and zinc. Silver Leang is a skilled, time consuming and expensive manufacturing process.
Consumer care is simple dusting or a cloth dampened with water and then dried with a clean cloth. Do not use aerosol
cleaners or oils on the Silver Leaf.
caracole.com