Assembly Instructions

On the passenger side of the top lid, locate key
and turn it to be parallel with the ground to
“unlock” and then remove the key (key will be
needed in step #8).
INSTRUCTIONS / INSTRUCCIONES / INSTRUCTIONS
1.
Check clearance area
4.
4
Place base on the ground. Remove
all FOUR clip hooks (F) located on cargo
carrier. You will reinstall them on the
cargo carrier in steps #2, #3 & #7.
Pull the center tab forward to allow the three
tabs to slide down into the corresponding slot.
2.
Place lid onto the base at approximately a 30° angle. It is
important to lower the top to allow the tabs to be placed
into the slots.
NOT Fully
Engaged
Squeeze the top and bottom hinges together.
Hinge tabs NOT fully engaged.
Back of
Base
Front of Base
Insert one clip hook
through center hinge
tab hole to secure.
IMPORTANT!
Clip hooks
Unlocked Locked
3 Tabs