Installation manual

3.4 Using Original Navigation Button
www.car-solutions.com
23
If you want to use OEM NAVI button for changing modes, you need to connect to 16 pin connector
wiring.
Find cables bundle connected to OEM DVD device (in glove box or under OEM monitor) and connect
orange wire from POWER cable with white wire of OEM DVD device. (NOTE: manufacturer can change
wiring colours!!!). If you have Audi A8, connect white/blue wire to orange wire of power cable as shown on
the left picture. You can learn more detailed information about installation in other car models at
Car
Solutions forum!!!
- Case of A8 -
Car Solutions