Installation guide
Table Of Contents
- AUDI 2009 with Touch Screen (3rd Generation MMI)
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- Slide Number 6
- Slide Number 7
- Slide Number 8
- Slide Number 9
- Slide Number 10
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- Slide Number 20
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
- Slide Number 25
- Slide Number 26
- Slide Number 27
- Slide Number 28
- Slide Number 29
- Slide Number 30
- Slide Number 31
- Slide Number 32
- Slide Number 33
- Slide Number 34
Take apart LCD monitor and factory LCD cable from
LCD monitor.
As left picture, after disassembling factory LCD cable,
connect provided LCD-OUT cable to the connector.
Connect the opposite side connector to sub-board
(“TO MONITOR”)
1. Connect LCD-OUT, OEM LCD Cables after disassembling LCD
Connect Factory LCD cable from DVD Unit to sub-board
(“LCD IN”)
-Installation Guide