User guide

3. Settings
3.3.3 FACTORY MODE-UTIL2
① First of all, press ◀ button on
remote controller 2 seconds
long or press
UP→DOWN→UP→MENU button
in order
to access Factory
② Picture above shows DVD
remote control button value
input, select menu you want
to save. (To register DVD
remote control button value,
FACTORY mode – Press ◀
◀◀
◀ button 2 seconds long on the remote control.
 UTIL2 – IR MEMORY
-16-
in order
to access Factory
mode. Choose IR MEMORY on
UTIL2.
In IR MEMORY, you can choose
AV source of DTV and DVD you
want to use.
remote control button value,
select IR MEMORY – DTV and
follow below instructions.
Example)
a. After select OK button on
OSD menu, press intended I-
Drive button
b. Indicated part above will
flicker, and press POWER on
DVD remote control.
(continue to next page)
What is IR-MEMORY Mode?
Is to allow Jog shuttle and touch screen to control other DVD or DTV
(besides the existing,; for example : SANYO, NECVOX) by register
remote control value.
www.car-solutions.com
[e-mail]
Car-Solutions.com