Installation guide

10
A P2000 enclosure has two controllers each with two FC ports. These ports are labeled A1 and A2 for controller A
and B1 and B2 for controller B. Fibre Channel connectivity was accomplished with the two FC ports on each
controller of the P2000 going to a separate FC SAN switch and then each dual port FC card on the DL980 is
connecting to the two separate SAN switches. This FC port mapping of each P2000 controller to separate FC HBAs
and HP SN6000 Stackable 8 Gb 24-port Dual Power Fibre Channel switches provides for failover redundancy. See
Figure 3 for connectivity diagram.
Figure 3. DL980, P2000 and SN6000 FC Switch connectivity diagram.