Installation manual

2.3 OSD Buttons Activation
www.car-solutions.com
10
>>
>>>
OSD buttons for DVD
For DVD control via OSD menu installer shall connect DVD system to AV1 input and join “DVD IR” cable from video interface cables with
DVD IR receiver DATA cable.
First of all, if you touch the screen in mode ”AV1”, you
can see the menu as shown left. And then if you do
NOT touch anything on the screen for 5 seconds or
longer; or if you touch the screen in the place beyond
menu, the menu will disappear.
At that time, if you choose “INPUT”, you can get out of
the menu and see the mode change menu.(left picture)
Here is a picture of the mode change menu. If you
select the channel which you want, you will switch to
selected video source. (right picture)
OSD buttons for CMMB, NAVI
DVD, navigation menu is available in English or Chinese. You can change menu language by pushing “MENU” button on remote
controller.
As shown above, if you touch the screen in mode ”AV2”, you can see
the menu as shown left. And then if you do NOT touch anything on the
screen for 5 seconds or longer; or if you touch the screen in the place
beyond menu, the menu will disappear.(left picture)
Here is a picture of the mode change menu. If you select the channel
which you want, you will switch to selected video source. (right picture)
Car Solutions