User manual

14
www.car-solutions.com
2.6 Touch calibration
① First of all, press ◀ button on remote controller 2
seconds long. Then you can access to the FACTORY mode.
② Register “YES” when the CALIBRATION option is
selected as shown above.
>>>
③ Then you can see “touch calibration” on
screen about 2 seconds long as shown above.
After the word “touch calibration” disappear,
touch calibration function will implement. (Just
touch “┼” shape on screen.)
If you succeed, you can see “success”. If not, you
will see “failure”.
Car-Solutions.com