User manual

Andover Continuum

Field Devices-3

Smart Sensor

The TAC Smart Sensor combines an attractive display with a room temperature sensor to provide

users with a cost effective way to view or modify local terminal unit operation. It is designed for

use with I2 controllers and can also accomplish many local control and monitoring tasks.

The standard sensor provides a two-character LED display and a 6 button programmable keypad

thatenablesoperatorsandoccupantstochangesetpoints,monitoroccupancystatusandturn

equipment on and off. An enhanced version is also available with a 4-digit custom LCD that

providesthefollowingicons:%,Setpoint,Cool,Heat,Fan,OA,andSP.

Thefunctionkeyscanbecustomprogrammedtoperformawidevarietyoffunctions,including

switchingaspecificzonetooccupiedmode,signallinganalarmcondition,adjustingtheamount

ofoverridetime,armingordisarmingasecuritysystem,andenforcingpasswordsecurity.

ProgrammingthedisplayandfunctionkeysisdonewithTAC’sPlainEnglishprogramming

language. Both versions of the Smart Sensor provide a connection for the RoamIO

OperatingRange: 0°Cto+40°C10-95%RH(non-condensing)

WireSpecifications: 0.2,0.3,0.5or0.8mm2,3conductor,unshieldedwire

SliderRange: 200to10,200ohms,+/-0.2%

LED: 0-5VDC@7mA

Accuracy: +/-2°Cforaminimumof5years

Dimensions: 115mm(H) x 89mm(W) x 27mm(D)

Smart Sensor with LED display and TAC logo TTS-SD-LED-1

Smart Sensor with LCD display and TAC logo TTS-SD-LCD-1

Smart Sensor with LED display, no logo TTS-SD-LED-B-1

Smart Sensor with LCD display, no logo TTS-SD-LCD-B-1

Buffer Board for Smart Sensor LED and LCD TTS-SD-INFBUF

Temperature Control Interactive Sensors