User manual

Andover Continuum
Field Devices-2
Wall Mount Sensor
TAC’swallmounttemperaturesensorsprovideaccurate,reliablemeasurementofinterior
spacetemperature.Thethermistorisencapsulatedwithalowmass,high-conductivitythermal
compoundforgoodheattransfercharacteristics.Itishousedinanattractive,well-ventilated
plasticenclosure.Theuniquetwo-piecedesignpermitschangeoutofthethermistormaterial,
whichislocatedinthecover,withoutrewiringorremovalofthebaseplate.Thecoverissecurely
attached to the backplate via two allen screws.
The sensor is for interior use only and is not suitable for use where condensation may occur.
Off-white finish with terminal strip connection.
OperatingRange: 0°Cto+40°C10-95%RH(non-condensing)
Accuracy: +/-0.2°Cfor5yearsminimum
WireSpecifications: 0.2,0.3,0.5,0.8mm2,2conductor,unshielded
Dimensions: 115mm(H) x 89mm(W) x 20mm(D)
Wall mount sensor with TAC logo TTS-S-1
Wall mount sensor without TAC logo TTS-S-B-1
Sensor Plus
The Sensor Plus combines the accuracy and reliability of the Wall Mount Sensor with an additional
setpointadjustmentslidercontrol,anoverridepushbuttonandaprogrammableLEDindicator.
TheSensorPlusutilisesanattractive,well-ventilatedplasticenclosureandthehousingissecurely
attachedtothebackplateviatwoallenscrews.Thesensorisforinterioruseonly,andisnot
suitable for use where condensation may occur. Models include a connection for the RoamIO
2
Tool. Off-white finish with terminal strip connection.
OperatingRange: 0°Cto+40°C10-95%RH(non-condensing)
Accuracy: +/-0.2°Cfor5yearsminimum
WireSpecifications: 0.2,0.3,0.5,0.8mm2,5conductor,unshielded
SliderRange: 200to2,000ohms,+/-20%
LED: 0-5VDC@7mA
Dimensions: 115mm(H) x 89mm(W) x 28mm(D)
Sensor plus with logo TTS-SE-1
Sensor plus without logo TTS-SE-B-1
Temperature Control Room & Interactive Sensors
Temperature Control Interactive Sensors