User manual

Andover Continuum
Andover Continuum
Network & Communications-3
b-Link (Copper)
Theb-Linkelectronicrepeatersaremulti-portactivehubsfortheBACnetMS/TPfieldbus,
designed to transmit RS-485 signals beyond the 4000-foot (1.2 km) limitation.
•1xRS-485input
•4xRS-485outputs
•1xRS-232outputforshorthaulmodems
•LEDindicationonallportsfortroubleshooting
•ACandDCversionsavailable
•CEapproved
Power: 115/230VAC(switchselectable)@2.5VAor24VDC@1W
OperatingRange: 0°Cto+49°C10-95%RH(non-condensing)
Dimensions: 210mm (H) x 191mm (W) x 59mm (D) (with enclosure)
b-Link with backplate - AC version B-LINK-AC-OP
b-Link with backplate - DC version B-LINK-DC-OP
b-Link with backplate & enclosure - AC version B-LINK-AC
b-Link with backplate & enclosure - DC version B-LINK-DC
DIN Rail Mounting Kit DIN-MTG-KIT
b-Link (Fibre)
Theb-Link-FhasoneRS-485port&twoduplexfibreports,andallowspoint-to-pointchaining
orstackingforuseinhubapplications.Usingtwob-Link-Fswithfibre,youcanconnectBACnet
between two buildings without worry of noise interference. Data transmission speeds are
selectable from 9600 to 76.8 baud.
•1xRS-485input
•2xduplexfibreoptic62.5/125outputs
•Allowspoint-to-pointchainingorstackingforuseinhubapplications
•Idealinareaswithhighelectricalnoiseinterference
•LEDindicationonallportsfortroubleshooting
•ACandDCversionsavailable
•CEapproved
Power: 115/230VAC(switchselectable)@2.5VAor24VDC@1W
OperatingRange: 0°Cto+49°C10-95%RH(non-condensing)
Dimensions: 175mm (H) x 155mm (W) x 50mm (D) (with enclosure)
b-Link fibre with backplate & enclosure - AC version B-LINK-F-AC
b-Link fibre with backplate & enclosure - DC version B-LINK-F-DC
DIN Rail Mounting Kit DIN-MTG-KIT
BACnet Network Drivers