User manual

Andover Continuum
Network & Communications-2
i2 Infilink 200
The i2 Infilink 200 is an electronic repeater and 5 port active hub in one device. Each RS485
output has the drive capability of up to 1200m or 31 separate devices. The Infinet field bus
system can accommodate both Infinet and Infinet II controllers.
•1xRS485input
•4xRS485outputs
•1xRS232outputforshorthaulmodems
•LEDindicationonallportsfortroubleshooting
•ACandDCversionsavailable
•CEapproved
•NotforusewithI/OModules
Power: 115/230VAC(switchselectable)@2.5VAor24VDC@1W
OperatingRange: 0°Cto+49°C10-95%RH(non-condensing)
Dimensions: 210mm (H) x 191mm (W) x 59mm (D) (with enclosure)
i2200 with backplate and cover plate only - AC version I2200AC-OP
i2200 with backplate and cover plate only - DC version I2200DC-OP
i2200 with enclosure and cover plate - AC version I2200AC
i2200 with enclosure and cover plate - DC version I2200DC
DIN Rail Mounting Kit DIN-MTG-KIT
i2 Infilink 210
The i2 Infilink 210 is a fibre optic repeater for use with the Infinet network. The Infinet field bus
system can accommodate both Infinet and Infinet II controllers.
•1xRS485input
•2xduplexfibreoptic62.5/125outputs
•Allowspoint-to-pointchainingorstackingforuseinhubapplications
•Idealinareaswithhighelectricalnoiseinterference
•LEDindicationonallportsfortroubleshooting
•ACandDCversionsavailable
•CEapproved
•NotforusewithI/OModules
Power: 115/230VAC(switchselectable)@2.5VAor24VDC@1W
OperatingRange: 0°Cto+49°C10-95%RH(non-condensing)
Dimensions: 175mm (H) x 155mm (W) x 50mm (D) (with enclosure)
i2210 with enclosure - AC version I2210AC
i2210 with enclosure - DC version I2210DC
DIN Rail Mounting Kit DIN-MTG-KIT
i2 Infilink Network Drivers
BACnet Network Drivers