User manual

Andover Continuum
Infinet
Andover Continuum
Infinet Controllers-19
Infinet Infinet
i2887 Series Terminal Controllers
TheInfinetII(i2)887isafullyprogrammable,lowcost,generalpurposeterminalcontroller.
IthasallthepowerofanInfinetIIcontroller,butwithasmallformfactor.Withitsunique
mixofthreeuniversalinputs,oneSmartSensor/roomsensorinput,fourtriacoutputsandone
relayoutput,thei2887canbeeasilyconfiguredtocontrolHeatPumps,FanCoils,orACunits.
Usethei2887fordirectcontroloffans,stagedheatingandcoolingandmonitoringofroom
temperature,outsideairtemperature,returnairtemperatureoroccupancystatus.Thei2887is
compactsoitcanbeinstalledintightlocationswiththreemountingscrews,anditsremovable
terminal connectors allow for easy servicing.
•CompactTerminalControllerProvidesLowCostFanCoilandHeatPumpControl
•ThreeUniversalInputsandOneSmartSensor/RoomSensorInput
•FourFormATriacOutputs,OneFormARelay,277VAC@3A
•Non-VolatileFlashMemoryProvidesUtmostReliability–StoresBothApplication
ProgrammeandOperatingSystem
•FlashMemoryAllowsEasyOn-LineSoftwareUpdates
•RemovableTerminalBlocksforEasyServiceability
•ViewandModifyInformationwithOptionalSmartSensorDisplay
•LocalOn-BoardServicePort
•TypicalApplications:
 •FanCoilUnits
 •HeatPumps
 •ChilledBeams
Technical Specifications
Power: i2887:24VAC,+10%-15%,50/60Hz
 i2887-L-xxx:115/230VAC,+10%-15%,50/60Hz
OperatingRange: 0°Cto+49°C10-95%RH(non-condensing)
Dimensions: i2887: 111mm (H) x 130mm (W) x 30mm (D)
i2887-L-230: 111mm (H) x 186mm (W) x 59mm (D)
i2887-L230-C: 149mm (H) x 206mm (W) x 70mm (D)
Memory: 512KSRAM,1MBFLASH
i2887 Controller i2887
i2887-L-230 Controller i2887-L-230
230 volt supply
i2887-L-230-C Controller i2887-L-230-C
230 volt supply with enclosure
Terminal Controllers i2887