User manual

Andover Continuum
Infinet Controllers-10
Infinet
Infinet
ACX Series for Ethernet
The ACX Series controllers for Ethernet are the most powerfull all-in-one access controllers
available for the Andover Continuum product line. The controllers are designed from the ground
uptohandlethelatestU.S.governmentsecurityrequirements.Additionally,theACXSeriesis
justasattractiveforoneasitisforeightdoorinstallations.
Onboard I/O for Access Control
Therearetwobasehardwaremodels:the5720andthe5740.The5740hasdoubletheinputs,readers
and outputs onboard as the 5720. These models come standard with the following I/O configurations:
ACX Series 5720 5740
Universal Inputs 6 12
Reader Inputs 4 8
Tamper Input 1 1
Digital Lock Outputs 2 4
TheACXisdesignedtosupportbothentryandegressreaderswhilesupplying+5or+12VDC
to each reader (120mA & 180mA respectively).
•10/100Base-TEthernetwith192-bitIPsec/IKEEncryption–fastandsecureIP
communicationsforNetworkSecurity
•480kpersonnelrecordcapacityenablespersonnelrecordstobestoredlocally
•
32MBofFlashMemoryand128MBofdynamicRAMensuredynamicmemoryretention
•AdvancedReaderInputswithdedicatedprocessor–leveragethepowerofthelatest
readertechnologies
•SupportforAreaLockdown–forrapid“Lockdown”ofaffectedareaswhenpotential
threatsaredetected
•Condition“Threat”level-basedAccessRights–forautomaticadjustmentofAccess
rightswhenconditionsandthreatlevelschange
•xPModuleSupport–createacontrollertailoredtoyourneeds
•FullCardFormatSupportupto256-bit–supportsthepastwhileplanningforthe
futureofaccesscardtechnologies
•SNMPSupport–providesforeasyIT-friendlymonitoringoftheaccesscontroller.
•
ModbusXDriverSupport–allowsAndoverContinuumtolinkwithModbusequipment
• Supportfor8or32Infinetnodes
Technical Specifications
Power: 24VAC,50/60Hz,12-28VDCauto-sensing
Power Consumption: 90 VA (AC) 50 W (DC)
OperatingRange: 0to+50°C10-90%RH(non-condensing)
InternalBattery: NiMH,3.6VDC,800mAh
Battery Backup: Minimum 7 days DDR SDRAM and real-time clock
Memory: SDRAM: 128MB; FLASH: 32MB
Dimensions: 210mm (W) x 241mm (L) x 57mm (H)
Character Position Options Description
1st-4th ACX- All part numbers start with ACX-
5th 2 “2”for4CardReaders,6DI,2DO,(5720)
 4 “4”for8CardReaders,12DI,4DO,(5740)
6th - 6th character is always “-”
7th-9th 000 No Nodes supported
008 8 Nodes supported
032 32 Nodes supported
10th H “H” for High Level Encryption
0 0 for no Encryption
11th X X for XDriver Support
0 0 for no XDriver Support
Note. Enables Comm 1 & Ethernet level XDriver
12th A
A for Advanced Alarming (includes both SNMP & Redundant Alarming)
0 0 for no Alarming options
13th C C for Critical Security Features (includes Condition “Threat” Level)
0 0 for no Critical Security features
Examples:
ACX-2-000HXAC  ACX5720,4Readers,HighEncryption,XDriverEnabled,
  AdvancedAlarming,CriticalSecurity.
ACX-4-00000AC  ACX5740,8Readers,AdvancedAlarming,CriticalSecurity
Network Master Controllers ACX5720/5740
ACX part numbers
2 31 4 5 6 7 8 9 10 11 12 13
C X - -A
XXXXXX XXXXXXX XXXXXX XXXXXX
Network Master Controller CX9702 AccessController