User manual
Andover Continuum
Infinet Controllers-4
Infinet
Infinet
TAC provides high performance network management with the Continuum family of CX
programmable network controllers. NetControllers use LON
®
technologyI/OModules,while
Continuum’sInfinetfieldcontrollersprovidestand-alonedirectdigitalcontrolofyourbuilding
services. Continuum network controllers act as system co-ordinators for the distributed intelligent
I/O modules providing:
•Networkcommunicationsandintegratedglobalcontrolacross
anEthernetnetwork
•FullprogrammabilityusingPlainEnglishprogramminglanguage
•User-friendlymenudriveninterface
•Localandremotealarming
•UseofTCP/IP(Internet)protocol
•ProgrammableRS-232/485connectionsformodems,terminalsandprinters
•Directprogrammableserialcommunicationstothirdpartyequipment.
•Optionalcommand-lineinterface
•SupportforuptotwoRS-485Infinetfieldbusnetworks
•In-builtWebservercapability
•SuitableforNetcontrollerIandNetcontrollerII
Continuum CX9900 Power Supply Unit (PSU)
The Continuum CX9900 power supply provides 24VDC power to the CX9900 NetController
(or NetController II) and associated I/O Modules. Powered by 120-240 VAC with optional full
UPS capability. A selection of programmable battery back-up modes is possible via Plain English
programming. The unit is capable of DIN rail or screw-in mounting with plug-in connection to
Continuum NetController or I/O Modules. CE Approved.
CX9900 P.S.U. (UPS) Battery Package CX99-PSU-BATT
220/240VAC50/60HzInput,70VAoutputwithUPScircuit.Package
includes a 24V DC power source and 2x 12V 6.5Ahr sealed rechargeable
batteries,clamp,cablesandaccessories.
CX9900 P.S.U. (UPS) Cable Package CX99-PSU-CABL
220/240VAC50/60HzInput,70VAoutputwithUPScircuit.Package
includesbatterycables(batteriesnotincluded,requires2x01-2100-423).
CX9900 P.S.U. (No UPS) PS120/240-AC85
220/240VAC50/60HzInput,50VAoutputwithoutUPScircuit.
Bag of 20 Female Connectors for I/O bus 01-0010-840
TheseconnectorsplugintotherightsideoftheNetControllers,asingle
I/O module or string of I/O modules. There are 5 male plug-in connectors
on the left and screw terminals on the right.
Single Male Connector for PS NetController 01-2050-285
TheseconnectorsplugintotheleftsideoftheNetController,asingleI/O
module or string of I/O modules.
Continuum 12V Battery, 6.5 amp 01-2100-423
PSU requires 2 x batteries.
NetControllers I & II Power Supply Units
Network Master Controller NetController II