User's Manual

"SIREN" activates the SIREN / STROBE( if these are installed) upon a Geo-fence transgression. These are

accessories not normally supplied with RAM3G. The sirens we supply will trigger on a pulse from RAM3G

and remain on for a period set by an internal timer in the siren. Cutting the wires to the siren will not disable it

once activated.

"NOSIREN" disables the Siren and Strobe if issued before a transgression is activated. If the Siren is

already activated, it will not turn it off. It will be up to the siren internal timer to time-out and reset itself. This

command only stops further triggering of external alarm devices. Contact us for other programmable siren

activation options.

SPECIAL COMMANDS

"REPORT xy//info" sets RAM3G up to send an AUTOMATIC "INFO" report every "xy" hours.

"TEMPRESET" alone, resets the Temperature Logs to present ambient temperature.

"TEMPRESET <>F(

or C)<> Max Temp// Min temp " F or C selects units, <> is a space, Max and Min

temps sets the maximum and Minimum ALERT temperatures, Range is 14 F (-10 C) to 176 F ( 80 C).F:

Fahrenheit,

C: Centigrade. Eg: TEMPRESET F 110//38

"HELP" responds with Help info on command syntax.

TEMPDEL n Temperature delay in minutes (n). Use to reduce transient alarms.

PWRDEL n Power loss alert delay in minutes (n). Use to reduce transient alarms.

ARM Activates SMS messaging ( Factory default)

DISARM Disables all SMS messaging.

ASK<>code Used in USSD enabled networks to request network subscriber data like prepaid simcard

balance amount. If code to get simcard dollar balance is say *120# from your cellphone,

then send RAM3G the code as ASK *120# and it will return the network message with this

information. Does not work with voice-only services. Requires USSD service.

PLE Power Loss alert ENABLE.

PLD Power Loss alert DISABLE.

EXTVOLT ON//v.v Alarm voltage setpoint for low voltage alert. Sets value to send alarm.

Eg EXTVOLT ON//11.8 Use in conjunction with PWRDEL delay time value to avoid

transient alarms. OFF/ON.

E1D n Add a Time delay of n minutes to switch n. Use to avoid transient alarms.

DATARESET Resets configuration to Factory default. Use with care. Custom changes will be lost.

CTXSO<n><space><msg> Change Switch (n) OPEN message to "msg".

CTXSC<n><space><msg> Change Switch (n)CLOSED message to " msg".

COMMAND STRINGS

RAM3G will accept multiple commands in the same text message as long as they are each separated by a

semi colon.

eg; GETSIG;INFO;TAMPER;SIREN;FIX

QUESTIONS and TROUBLESHOOTING

Please refer to our website for Frequently asked questions and troubleshooting guidelines.