Use and Care Manual

© Capri Tools4 5
© Capri Tools
•
of injury.
• Keep a good grip on your balance to avoid some of the most dangerous hazards, including slipping, tripping, and
falling.
Air Impact Wrenches:
•
• The sockets used must be of the correct drive size and impact type. Never use sockets other than impact type.
• Do not use sockets with excessive wear to the input and output drives. Check that the square on any other type of
•
• Ensure that the tool has been set up on a test joint. Incorrect set up could cause joint breakage with sudden and
unexpected movement of the tool.
•
•
• Use safety glasses, gloves and ear protectors to protect yourself when using this tool.
Sanders and Grinders:
•
approved for the corresponding tool.
• Use safety barriers to protect others from wheel fragments and grinding sparks.
• Always use the recommended wheel guard to prevent injury form broken grinding wheel parts.
•
• Place the guard between the grinding wheel and the operator.
•
• Do not use chipped or cracked grinding wheels.
•
•
may over stress the wheel.
•
• Do not wear jewelry or loose clothing; constrain long hair.
Air Tools Safety:
•
•
•
the possibility of the chisel launching out.
•
trapped.
• Avoid using any saw blades, chisels, drill bits, grinding wheels or stones, sockets or any other accessories with
excessive wear.
•
•
• -
al.
• Conduct a full safety check on your air system before using it.
•
• Keep the air tool directed at the object to be worked on and never towards yourself or anyone else.
• Never exceed 90 psi/6.3 bar of air pressure.
• When changing accessories, making repairs, and when air tool is generally not being used, be sure to keep the air
Personal Safety:
•
• Don’t allow your gloves, hair, accessories or clothing near the moving parts.
• Always stay mindful and alert. Use good judgment and common sense when working with tools.
•
• Make sure the switch is set to OFF when the tool is not in use, and especially before plugging it in.
• Only use the proper accessories.
•
•
• Dress for work. Avoid any loose clothing or jewelry, and restrain any long hair.
• Don’t operate tools when they’re not being directly applied on the intended work piece. This could lead to the
• Long, springy extensions absorb impact power and could break. It’s always best to use the simplest extension possi-
ble.
•
tools with excessive wear and tear.
• Make sure everyone in the vicinity is wearing proper safety equipment, including impact resistant eye goggles and
face masks.
•
•
or maintenance of the tool.
Keeping a Safe Workplace:
• Always keep visitors, children, and bystanders away from the tool being used.
• This tool should be kept away from explosive atmospheres and electrical power sources.
• Keep your work area well lit, organized, and clean.
• No person who is not physically equipped to handle the weight and power of this tool should operate it.
• When dust and/or debris is going towards your face, be sure not to breathe it in as it can be hazardous.
•
Always wear safety goggles.
Safety Symbols
CAPRI TOOLS
CUSTOMER SUPPORT
[phone]
[e-mail]
www.capritools.com