Technical data

70
7 Maintenance
Carefully pull off the cappuccino nozzle.
Dismantle the cappuccino nozzle completely.
Rinse all the nozzle parts thoroughly under running water.
Reassemble the cappuccino nozzle and attach it once more
to the connector.
Even the highest-quality coffee beans can contain foreign objects.
These can block the grinder.
Q T Switch your machine off with the On/Off button.
3 T Switch your machine off at the power switch.
Open the cover of the bean container and remove the aroma
preservation cover.
Remove the beans with a vacuum cleaner.
Position the grinder key.
Turn the key counterclockwise until the jammed foreign
object is released, and remove the object.
Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These residues may negatively affect
the coffee results. For this reason clean the bean container from
time to time.
Precondition:
COFFEE READY / FILL BEANS is shown on
the display.
Q T Switch your machine off with the On/Off button.
3 T Switch your machine off at the power switch.
Open the cover of the bean container and remove the aroma
preservation cover.
T
T
T
T
T
T
T
T
T
T
Dismantling and
rinsing the
cappuccino nozzle
Dismantling and
rinsing the
cappuccino nozzle
Removing foreign
objects
Removing foreign
objects
Cleaning the bean
container
Cleaning the bean
container