Technical data

67
7 Maintenance
Replace the cappuccino nozzle.
Place a receptacle under the hot water and coffee spout and
the cappuccino nozzle.
c T Press the maintenance button.
MACHINE IS DECALCIFYING, water flows out of
the hot water spout and the cappuccino nozzle.
UNIT IS HEATING, RINSING water flows out of
the coffee spout.
The process stops automatically,
TRAY / GROUNDS
EMPTY.
Empty the drip tray and coffee grounds container and put
them back into the machine.
The descaling operation is now complete. Your IMPRESSA
heats up and is once again ready to use.
If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
You can initiate the operation ‘Descaling the machine’ manually.
Precondition:
COFFEE READY appears on the display and the
filter is not activated.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
k T Press the Rotary Switch to enter the programme item.
CAPPUCCINO CLEANING
g T Turn the Rotary Switch until DESCALE MACHINE is
displayed.
k T Press the Rotary Switch.
DECALCIFYING TIME 45 MIN / START YES
Continue with the second prompt to take action (indicated
by a T), as is described under ‘Descaling following a
prompt’.
T
T
T
E
T
Manual descalingManual descaling