Technical data

7 Maintenance

Precondition: COFFEE READY is shown on the display.

Place a receptacle under the coffee spout.

k T Keep the Rotary Switch pressed until

MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

g T Turn the Rotary Switch until MACHINE RINSING

appears.

k T Press the Rotary Switch to initiate the rinse operation.

RINSING

Rinsing stops automatically and your IMPRESSA is then

ready for use.

After 50 litres of water have flowed through the filter, or after

two months, its capacity is reached. Your IMPRESSA will auto-

matically prompt you to change the filter.

If the CLARIS plus filter cartridge is not activated, you will not

be prompted to change the filter.

You can also try out ‘changing the filter’ online. Visit the

Knowledge Builder at www.jura.com.

To change the CLARIS plus filter cartridge when prompted to do so

by your IMPRESSA, proceed as follows:

Precondition:

COFFEE READY / FILTER CHANGE is dis-

played and the maintenance button c lights up.

c T Press the maintenance button.

CHANGE TIME 2 MIN / START YES

If you want to change the filter at a later point in time, turn the

Rotary Switch until

CHANGE / START NO is displayed. Exit

the maintenance programme by pressing the Rotary Switch.

The prompt ‘change filter’ remains on the display.

Changing the filter Changing the filter

Change following a promptChange following a prompt