Technical data

50
6 Permanent settings in programming mode
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk of
1 latte macchiato from
16 SECS to 20 SECS, the pause from
30 SEC to 40 SEC and the amount of water from 45 ML to
40 ML.
Precondition:
COFFEE READY is shown on the display.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
PRODUCT / SELECT PRODUCT
Next select the product button for which you would like to
make settings. No product is prepared during this procedure.
To change a setting for a double product, press the corre-
sponding button twice within a period of two seconds.
q T Press the Latte Macchiato button.
1 LATTE MAC. / AMOUNT 45 ML
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / AMOUNT 45 ML
g T Turn the Rotary Switch until 1 LATTE MAC. / AMOUNT
40 ML is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED √ appears briefly on the display to confirm
the setting.
1 LATTE MAC. / AMOUNT 40 ML
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
16 SECS is displayed.
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / MILK 16 SECS
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
20 SECS is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED √ appears briefly on the display.
1 LATTE MAC. / MILK 20 SECS
E
E