Technical data

31
3 Familiarising yourself with the control options
Settings in programming mode always follow the same model.
Example: To change the strength of one espresso from
NORMAL
to
STRONG proceed as follows:
Precondition:
COFFEE READY is shown on the display.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
PRODUCTS / SELECT PRODUCT
Next select the product button for which you would like to
make settings. No coffee speciality is prepared during this
procedure.
To enter a setting for the double product, press the corre-
sponding button twice within a period of two seconds.
i T Press the Espresso button.
1 ESPRESSO / AMOUNT 60 ML
g T Turn the Rotary Switch until 1 ESPRESSO / NORMAL is
displayed.
k T Press the Rotary Switch to enter the programme item.
1 ESPRESSO / NORMAL
g T Turn the Rotary Switch until 1 ESPRESSO / STRONG
appears.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED √ appears briefly on the display to confirm
the setting.
1 ESPRESSO / STRONG
g T Turn the Rotary Switch until 1 ESPRESSO / EXIT is
displayed.
k T Press the Rotary Switch to exit the programme item.
PRODUCTS / SELECT PRODUCT
g T Turn the Rotary Switch until PRODUCTS / EXIT is dis-
played.
k T Press the Rotary Switch to exit the programme item.
PRODUCTS
E
E