Technical data

29
3 Familiarising yourself with the control options
u T Press and hold the Ristretto button.
1 RISTRETTO and the coffee strength is displayed.
u T Hold the Ristretto button down until
ENOUGH? / PRESS
BUTTON
appears.
u T Release the Ristretto button.
Coffee preparation starts and the ristretto flows into the
cup.
Press any button as soon as enough ristretto has flowed into
the cup.
Preparation stops automatically.
CONFIRMED √ appears
briefly on the display. The set amount of water for a ristretto
is saved as a permanent value.
COFFEE READY is shown
on the display.
You can alter these settings at any time by repeating the
above procedure.
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. Simply by turning and pressing the Rotary Switch,
you can navigate through the easy-to-understand program steps
and make permanent settings.
You can make the following settings with the Rotary Switch:
T
E
Permanent settings in
programming mode
Permanent settings in
programming mode
Programme item Subitem Explanation
MAINTENANCE CAPPUCCINO
CLEANING,
FILTER CHANGE,
MACHINE CLEAN,
CAPPUCCINO
RINSING,
MACHINE DESCALE,
MACHINE RINSE
Select the desired maintenance programme.
If no action is taken, programming
mode is exited automatically after approx.
five seconds.
T
PRODUCTS
SELECT PRODUCT Select your settings for the coffee and milk
specialities and hot water.
T
FILTER
I.P.W.S.
YES
NO
Indicate whether you operate your
IMPRESSA with or without a CLARIS plus filter
cartridge.
T