Technical data

27
3 Familiarising yourself with the control options
Example: Proceed as follows to prepare one espresso.
Precondition:
COFFEE READY is shown on the display.
Place an espresso cup under the coffee spout.
i T Press the Espresso button.
1 ESPRESSO and the coffee strength is displayed.
The pre-set amount of water flows into the cup and the
process stops automatically.
COFFEE READY is shown on the display.
Example: Proceed as follows to prepare two espressi.
Precondition:
COFFEE READY is shown on the display.
Place two espresso cups under the coffee spout.
i T Press the Espresso button twice (within two seconds).
2 ESPRESSI, the pre-set amount of water flows into the
cups.
Preparation stops automatically.
COFFEE READY
appears on the display.
The coffee strength can be changed before preparation or during
the grinding operation.
The following coffee strengths can be selected for 1 ristretto,
1 espresso, 1 coffee, 1 special coffee, 1 cappuccino and 1 latte mac-
chiato:
Xmild
Mild
Normal
Strong
Xstrong
The pre-set amount of water can be changed during the
brewing operation by turning the Rotary Switch.
One-off settings before and during coffee preparation always follow
this model. These settings are not saved.
T
T
U
U
U
U
U
E
Preparing a coffee speciality
at the touch of a button
Preparing a coffee speciality
at the touch of a button
Preparing two coffee
specialities at the touch
of a button
Preparing two coffee
specialities at the touch
of a button
One-off setting before
and during preparation
One-off setting before
and during preparation