Technical data

43
6 Maintenance
T Empty the drip tray and coffee grounds container and put
them back into the machine.
SOLVENT IN TANK
T Remove the water tank and empty it.
T Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a container that holds 600 ml of water. This
may take several minutes.
T Pour the solution into the empty water tank and insert it in
the machine.
SOLVENT IN TANK / PRESS RINSE, the mainte-
nance button c lights up.
T Remove the frother from the Connector System
©
.
T Place a receptacle under the hot water spout and another
under the Connector System
©
.
c T Press the maintenance button.
DECALCS, water flows out of the Connector System
©
and
the hot water spout. The maintenance button c flashes
during the descaling operation.
E You can follow the current status of descaling on the progress
bar.
The process is interrupted,
EMPTY TRAY.
T Empty the receptacles below the hot water spout and the
Connector System
©
.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
RINSE WATER TANK / FILL WATER TANK
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert.
PRESS RINSE, the maintenance button c lights up.
T Refit the frother.
T Place a receptacle under the coffee and hot water spout and
another under the frother.
c T Press the maintenance button.
DECALCS, water flows out of the frother and the hot water
spout.
The process is interrupted,
HEATING UP.