Technical data

40
6 Maintenance
T Carefully remove the frother from the Connector System
©
by twisting slightly.
T Dismantle the frother completely.
T Rinse all the frother parts thoroughly under running water.
T Reassemble the frother.
E Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the
frother.
T Firmly attach the frother to the Connector System
©
.
After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA
will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
T Use only original JURA care products.
E The cleaning programme only lasts about 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from stockists.
@ You can also try out the ‘Cleaning the machine’ operation
online. Visit the Knowledge Builder at www.jura.com.
Precondition:
COFFEE READY / CLEAN MACHINE is dis-
played, and the maintenance button c lights up.
c T Press the maintenance button.
DURATION 20 MIN. / START YES
E If you want to clean the machine at a later point in time, turn
the Rotary Switch until
START NO is displayed. Exit the
maintenance programme by pressing the Rotary Switch. The
prompt ‘Clean machine’ remains on the display.
c T Press the maintenance button.
EMPTY TRAY
Disassembling and
rinsing the Easy
Cappuccino Frother
Cleaning the machine
CAUTION
Cleaning following a
prompt