Technical data
27
4 Preparation at the touch of a button
T Open the cover of the filler funnel for pre-ground coffee.
T Open the cover of the Rotary Switch.
v T Press the Pre-ground coffee button.
FILL PRE-GROUND / COFFEE READY
T Place one level measuring spoon of pre-ground coffee into
the filler funnel.
T Close the cover of the filler funnel for pre-ground coffee.
o T Press the 1 Coffee button.
1 COFFEE, the pre-set amount of water flows into the cup.
Preparation stops automatically.
ENJOY appears on the
display.
COFFEE READY is then displayed.
E This chapter applies to the Professional and Easy Cappuccino
Frothers.
There are two options for preparing hot milk or milk foam:
Z Milk portion z
U The preset quantity of milk is then prepared.
Z Milk n
U Milk is prepared until preparation is interrupted by pressing
any button.
Example: Proceed as follows to prepare milk foam.
Precondition:
COFFEE READY is displayed.
T Take the protective cover off the frother.
T Attach the milk pipe to the frother. For a milk carton/bottle
use the long pipe, for a milk container the short pipe.
T Insert the other end into a milk carton/bottle or connect it to
the milk container.
T Place a cup under the frother.
E If you are using the Professional Cappuccino Frother, turn
the selector switch to the Milk Foam position p.
E If you want to heat the milk, turn the selector switch of the
Professional Cappuccino Frother to the Milk position t.
รถ T With the selector switch select the milk portion symbol z.
Hot milk
and milk foam