Technical data

22
3 Familiarising yourself with the control options
Programme item Subitem Explanation
RESET
PRODUCT
,
ALL PROD.,
ALL,
EMPT.SYST.
T Reset the permanently set values of all
products to the factory settings.
INFORMATION
T Keep track of all prepared coffee and milk
specialities and view the maintenance
status.
SETTINGS ML/OZ
T Select the unit of the amount of water.
LANGUAGE
T Select the desired language.
EXIT
T Exit programming mode.
Settings in programming mode always follow the same model.
Example: To change the strength of one espresso from
öööö (strong) to ööö (normal).
Precondition:
COFFEE READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
SELECT PRODUCT
E Next select the product button for which you would like to
make settings. No product is prepared during this procedure.
i T Press the 1 Espresso button.
WATER 45 ML
g T Turn the Rotary Switch until AROMA öööö is displayed.
k T Press the Rotary Switch to enter the programme item.
STRONG öööö
g T Turn the Rotary Switch until NORMAL ööö is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED w appears briefly on the display.
AROMA ööö
g T Turn the Rotary Switch until EXIT is displayed.