Technical data

20
3 Familiarising yourself with the control options
T Open the cover of the Rotary Switch.
o T Press the 1 Coffee button.
1 COFFEE and the pre-set coffee strength is displayed.
The brewing operation starts and the coffee flows into the
cup.
g T Turn the Rotary Switch during the brewing operation until
1 COFFEE / 110 ML is displayed.
The set amount of water flows into the cup. Preparation
stops automatically.
ENJOY appears on the display.
COFFEE READY is then displayed.
It is easy to make permanent settings for the amount of water for all
coffee specialities, cappuccino, latte macchiato, a portion of hot
water and portion of milk according to the cup size. As in the follow-
ing example, adjust the amount of water once. Every time you pre-
pare a drink in the future, this amount of water will be dispensed.
Making the permanent settings for the amount of water for the
respective cup size always follows this model.
Example: To make permanent settings for the amount of water for
an espresso, proceed as follows:
Precondition:
COFFEE READY is displayed.
T Place an espresso cup under the coffee spout.
i T Press and hold the 1 Espresso button.
1 ESPRESSO and the coffee strength is displayed.
i T Hold the Espresso button down until
ENOUGH COFFEE?
appears.
i T Release the 1 Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
T Press any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically.
CONFIRMED w appears
briefly on the display. The set amount of water for an espres-
so will be permanently stored.
COFFEE READY is then
displayed.
E You can alter these settings at any time by repeating the
above procedure.
Entering a permanent
setting for the amount
of water for a cup size