Technical data

35
6 Maintenance
o Perform the next step as soon as the light segment by the
switch is flashing. This means that the IMPRESSA has reached
the temperature necessary for steam. If the light segment is
no longer flashing, turn the Rotary Switch once again to the
Steam symbol
k and press the Rotary Switch. As soon as the
required temperature has been reached, the light segment by
the switch will flash again.
r l Turn the switch in the anticlockwise direction.
The frother and pipe are rinsed with fresh water.
t l Turn the switch in the clockwise direction as soon as the con-
tainer holding the water is empty.
Cleaning of the Easy Cappuccino Frother is now complete
and your IMPRESSA is ready to use again.
The water tank may build up deposits of limescale. In order to
ensure perfect working order, descale the water tank from time to
time.
l Remove the water tank.
l If you use a CLARIS filter cartridge, remove this.
l Descale the tank with a mild, commercially available descal-
ing agent in accordance with the instructions of the manu-
facturer.
l Rinse the water tank with clean water afterwards.
l If you use a CLARIS filter cartridge, insert this again.
l Fill the water tank with fresh water and insert it again.
Descaling
the water tank