Technical data

34
6 Maintenance
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it daily when you have been preparing milk.
o The IMPRESSA will not prompt you to clean the Easy Cappuc-
cino Frother.
o Your dealer will stock the JURA Cappuccino Cleaner.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
l Use only original JURA care products.
@ Try this operation out on the Internet. Visit the Knowledge
Builder on www.jura.com.
Precondition: your IMPRESSA is ready for use.
l Place a receptacle under the Easy Cappuccino Frother.
l Pour 250 ml of fresh water into a container and add one
capful (max. 15 ml) of Cappuccino Cleaner.
l Immerse the milk pipe in the receptacle.
ä l Turn the Rotary Switch so that it points to the Steam
symbol
k .
m l Press the Rotary Switch to confirm the action.
The Steam symbol
k will continue flashing until the
IMPRESSA has warmed up.
As soon as the required temperature has been reached, the
light segment by the switch will flash.
r l Turn the switch in the anticlockwise direction.
The frother and pipe will be cleaned.
t l Turn the switch in the clockwise direction as soon as the con-
tainer holding the Cappuccino Cleaner is empty.
The light segment by the switch will now flash.
l Fill the receptacle with 250 ml of fresh water and immerse
the milk pipe in it.
Cleaning the Easy
Cappuccino Frother
CAUTION