Technical data

33
6 Maintenance
r l Turn the switch in the anticlockwise direction.
This causes water to flow out of the Connector System
©
.
The operation stops automatically, and the light segment by
the switch flashes.
t l Turn the switch in the clockwise direction.
The descaling operation will resume. After a few minutes,
the coffee grounds container indicator
x flashes.
l Empty the drip tray and the coffee grounds container.
l Insert the empty drip tray and coffee grounds container
back in the machine.
l Put back the frother.
The descaling operation is now complete. The Maintenance
symbol
h flashes, the IMPRESSA heats up and is once
again ready for use.
o If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
You can initiate the operation ‘Descaling the machine’ manually.
Start when the first prompt appears
l, as described under ‘Descal-
ing following a prompt’.
To ensure that the Easy Cappuccino Frother works perfectly, you
should rinse it with water whenever you have prepared some milk.
o The IMPRESSA will not prompt you to rinse the Easy Cappuc-
cino Frother.
l Carefully remove the Easy Cappuccino Frother from the
Connector System
©
.
l Take the Easy Cappuccino Frother apart.
l Rinse all the frother parts thoroughly under running water.
l Reassemble the Easy Cappuccino Frother and attach it to the
Connector System
©
.
Manual descaling
Rinsing the Easy
Cappuccino Frother